FEATURES

Applicable to high withstand voltage fuse

Applicable to PV fuse of 10 × 38 size for photovoltaic module.

Dual actions

To remove a fuse, ① pull and ② slide the fuse.

Structure to prevent electric shock caused by accidental touch and fuse insertion during wiring

When the cover is lowered, the user hardly touches the live part. This structure ensures high safety. When the cover is raised, the cover blocks fuse insertion during wiring.

Rated insulation voltage: 1,500 V DC

The fuse holder provides 1,500 V DC insulation characteristic.。
*1 Conforming to IEC 60947-3 (Equivalent to JIS C 8201-3)
*2 If required insulation voltage is higher than 600 V, assemble the units so that heights of the screw terminals are staggered.

Quick and easy DIN-rail mounting and removal are enabled by unit.

By operating the stopper, you can remove each unit easily without detaching the fastening bracket.

A removed fuse carrier can be temporarily set on the holder.

A fuse carrier can be temporarily set on the holder through insertion into the holder cover.